I FEW OF MY FRIENDS BUILT AN AR 15 THIS IS ALL THE RAGE RIGHT NOW BUT I HAVE TO ASK HOW GOOD IS A AR 15 MADE OUT OF MIX MATCHED PARTS FROM A HALF DOZEN MANUFACTURERS.
Posts: 1632 | From: detroit michigan. | Registered: Apr 2001
| IP: Logged
Back when super niggger was the POTUS it seemed like every wannabe "gun smith" was slap dashing AR's together with after market no name parts and then taking them to gun shows and trying to sell them to dumbass gun buyer's for big bucks.
I only own two AR's. A Colt HBAR Match Target and a Bushmaster M4 carbine. There is no way I will buy some POS parts gun at any price.
You can build a really nice gun from disparate parts. It will be as good as the quality (cost) of the parts assembled.
An acquaintance just build a 6.5 Creedmore on a DPMS lower. Everything first class, first group shot was sub MOA.
Price tag = $2,800
-------------------- "When a nation makes too great a distinction between its scholars and its warriors it winds up having its thinking done by cowards and its fighting done by fools." Thucydides Posts: 3080 | From: Exit 196 | Registered: Nov 2001
| IP: Logged
Yes you can, yes you should. To the surprise of many people out there, the big brand names use the same barrel manufacturer (not all) and one of 5 upper receiver manufacturers that are military contractors.
The main thing is to make sure your bolt head is MPI tested. It is the heart of the gun. It can be as cheap as you can find it, as long as it is tested. I think Nitride finish bolts wear better, IMHO.
Anderson lowers are just as good as my Bushmaster lower. Please let me spend the mistake money for you and pass on plastic or hybrid receivers.
Play around with buffer weights. and dial in your performance.
Posts: 5 | From: East Texas | Registered: Mar 2020
| IP: Logged
When doing a self build you are your own procurement,production and QC person all rolled into one. Do your due diligence on parts or parts assembly quality. I won't name names but there are some makers I wouldn't touch with a 10ft cleaning rod. Also don't go cheap on tools. Like try to use non AR specific ones for the build. In 2020 there's no excuse for it good decent tools are out there. Back to quality.. modern manufacturing processes unless they hire complete morons can crank out great intolerance products. My main advice with AR parts are stick with USA made stuff. My last build had major components from 7 different makers and it's snug fitting and works great.
-------------------- In 1967, Polish mercenary Rafal Ganowicz was asked what it felt like to take a human life. He replied- "I wouldn't know I've only killed communists." Posts: 2600 | From: Washington Co., Arkansas | Registered: May 2004
| IP: Logged
All contributions become the property of HardCoreTalk.com The Opinions, Views and Comments expressed by the members of this forum and website are their own and do not necessarily state or reflect those of HardCoreTalk.com or any of it's agents. HardCoreTalk.com does not guarantee the accuracy, integrity or quality of these messages and opinions, and does not perform an independent investigation to verify their truth or accuracy. All posted messages are the sole responsibility of the person from which such post originated. HardCoreTalk.com assumes no liability in any way for the content of any posted message or opinion, including, but not limited to, any errors or omissions in any posted message
FAIR USE NOTICE
This board contains copyrighted material, which is reproduced under the Fair Use Provision of Title 17, U.S.C. Section 107, and is posted for purposes such as criticism, comment, news reporting, teaching, scholarship, or research. This material is posted without profit for the benefit of those who, by accessing this site, are expressing a prior interest in this information for research and educational purposes.
This discussion board is strictly operated as a non profit venture and is for the express purpose of educating and informing our members and visitors.